Solar Power Home

There are a few ways to use the Sun’s energy to create home solar power systems. They can be categorized as passive and direct systems. Passive systems have been use for thousands of years and the inspiration behind such systems was probably the fact that our ancestors felt hot in the Sun. From this point they realized that the heat from the Sun can make water hot, cook food, dry clay bricks and countless other applications. Today there are systems that can passively heat the home living areas and the water used in the home. This article will not cover these topics but focus on the direct use of the Sun to create electricity for use in the home.

In terms of the use of solar energy, creating electricity from sunlight is a relatively new innovation. The technology needed to create electricity from sunlight was first developed to a commercially viable standard in the 1950’s. It is known as the photovoltaic (PV) cell. A PV cell is made of a silicon compound that reacts when photons from sunlight strike it. This reaction causes an electron from the silicon atom to be thrown loose. When a number of PV cells are linked together in a serial configuration, the electrons flow to a positive charge creating an electrical current.

Many PV cells connected together in series is referred to as a solar module. When many solar cells are connected together than are known as a solar panel.

Solar panels are the devices that you may have seen on the roofs of houses in your neighborhood. They can be placed elsewhere, but the roof is often the most sensible place as it is likely to get exposed to direct sunlight and the panels can’t be damaged or vandalized as easily or take up room in the yard.

The solar panels create direct current (DC) electricity. This is often pushed through a power inverter. The inverter converts DC to alternating current (AC). AC is used in the home to power most appliances.

An electrical service panel or breaker box then distributes the AC to various electrical points in the house or to the lighting system. A utility meter manages your electricity usage if you are connected to the grid.

An example of how this works is during midday. In theory this is the best time for your solar panels to create electricity. As you may be out or at work this will also be the time when you use little or no electricity. So the utility meter might go backwards indicating that you are generating electricity for the utility company.

There are two types of home solar power system - on or off the grid. On the grid is sometimes referred to as a net metering system. This refers to laws enacted in some states that require utility companies to pay a certain amount for the electricity that a home owner generates with their solar power system. Before these laws, the utility company would buy at a discounted rate making the installation of a solar panel less economically viable for the homeowner.

Off grid systems are exactly that. The home is not connected to an electricity supply and all the power must be generated by the solar power system. More thought needs to go into the system and a back up system is needed if the solar panels cannot meet your energy demands or there is bad weather.

Many people will have a fuel powered generator for this purpose. People more interested in renewable power sources might go for a wind power generator or some other renewable system. Another aspect of an off the grid system is that DC needs to be stored in a battery bank for use at night or when the Sun is not shining. This is another responsibility and space has to be found on the property to securely house the batteries.

Most people start with a grid tied system as it is easier to use and there is less responsibility. As you gain more experience you may think about going off the grid. This form of home solar power system will save you money on monthly utility bills but more work to run and maintain.